REKA Cleaning Kit for French Horn
Reka Cleaning Kit for French Horn includes cleaning cord for tubes, cleaning bar for tuning slides and valve casings, cleaning bar for valve cylinders, and conical mouthpiece brush. Regular treatment with this cleaning set prevents saliva from accumulating on the walls of the tubes which contains aggressive components that attack and corrode the tubes from the inside. This deposit muffles the resonance of the instrument, blowing becomes more difficult. Keeping your instrument internally clean is critical for reliable performance, hygiene, and general maintenance. Cleaning instructions are on the packaging.
In stock
SKU
R4-FH
RRP AU$44.00 AU$39.60
Reka Cleaning Kit for French Horn
Keeping your instrument internally clean is critical for reliable performance, hygiene and general maintenance.
Saliva accumulating on the walls of the tubes contains aggressive components which attack and corrode the tubes from the inside.
This deposit muffles the resonance of the instrument, blowing becomes more difficult.
Regular treatment with this cleaning set prevents these problems from ever arising.
Keeping your instrument internally clean is critical for reliable performance, hygiene and general maintenance.
Saliva accumulating on the walls of the tubes contains aggressive components which attack and corrode the tubes from the inside.
This deposit muffles the resonance of the instrument, blowing becomes more difficult.
Regular treatment with this cleaning set prevents these problems from ever arising.
This deposit muffles the resonance of the instrument, blowing becomes more difficult.
Regular treatment with this cleaning set prevents these problems from ever arising.
Contents:
- Cleaning cord for tubes
- Cleaning bar for tuning slides and valve casings
- Cleaning bar for valve cylinders
- Conical mouthpiece brush
Cleaning instructions are on the packaging.
Cleaning instructions:
- 1. Pull out all slides from the instrument
- 2. Run water through the part of the instrument to be cleaned and soak it in soapy water or REKA DES cleaning fluid
- 3. Slip the ball on the end of the cleaning string into the tube to be cleaned and pull the cleaning cloth slowly through
- 4. Always choose the shortest passage. All tubes can be reached in this way, even the short tubing sections between valves. Rotary valves must be turned accordingly to allow passage of the ball and cloth
- 5. Use the other cleaning tools as shown in the drawings
- 6. Finally, rinse each part that was cleaned with lukewarm, soapy water, shake out the excess water, and allow the instrument to dry
- 7. The cleaning tools should never be exposed to temperatures above 40� C (100� F) and should be kept clean and dry to avoid damage to the rubber parts
Write Your Own Review
Customers also purchased
